Allied Telesis AT x930-52GTX / Switch / L3 / Managed / 48 x 10/100/1000 + 4 x 10 Gigabit SFP+ / rack-mountable | AT-X930-52GTX
Product Features
- Allied Telesis Management Framework (AMF)
Allied Telesis Management Framework (AMF) is a sophisticated suite of management tools that provide a simplified approach to network management. Powerful features like centralized management, auto-backup, auto-upgrade, auto-provisioning and auto-recovery enable Plug-and-Play networking and zero-touch management. - Long-distance stacking
Long-distance stacking allows a VCStack to be created over longer distances, perfect for a distributed network environment. - Virtual routing and forwarding (VRF)
VRF provides Layer 3 network virtualization by dividing a single switch into multiple independent virtual routing domains. With independent routing domains, IP addresses can overlap without causing conflict, allowing multiple customers to have their own secure virtual network within the same physical infrastructure. - Power over Ethernet Plus (PoE+)
With PoE, a separate power connection to media endpoints such as IP phones and wireless access points is not necessary. PoE+ reduces costs and provides even greater flexibility, providing the capability to connect devices requiring more power. - High reliability
The x930 series switches feature front to back cooling and dual power supply units (PSUs). The x930 features dual hot-swappable load sharing power supplies for maximum uptime, and either front-to-back or back-to-front cooling. - Voice VLAN
Voice VLAN automatically separates voice and data traffic into two different VLANs. This automatic separation places delay-sensitive traffic into a voice-dedicated VLAN, which simplifies QoS configurations.
Special Features
- Allied Telesis Management Framework (AMF)
- Long-distance stacking
- EPSRing (Ethernet Protection Switched Ring)
- Virtual routing and forwarding (VRF)
- Power over Ethernet Plus (PoE+)
- High reliability
- Voice VLAN
Product Specification
Device Type | Switch - 48 ports - L3 - Managed - stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | Gigabit Ethernet |
Ports | 48 x 10/100/1000 + 4 x 10 Gigabit SFP+ |
Performance | Stacking bandwidth: 40 Gbps ¦ Switching fabric bandwidth: 336 Gbps ¦ Forwarding performance: 250 Mpps ¦ Latency (10 Mbps): 47.4 µs ¦ Latency (100 Mbps): 7.9 µs ¦ Latency (1000Base-T): 3.9 µs ¦ Latency (10 Gbps): 2.6 µs |
Capacity | Priority queues per port: 8 ¦ VLANs supported: 4096 ¦ Virtual Routing and Forwarding (VRF) entries: up to 64 |
MAC Address Table Size | 64K entries |
Jumbo Frame Support | 13KB |
Routing Protocol | BGP-4, RIP-1, RIP-2, BGP, IGMPv2, IGMP, OSPFv2, PIM-SM, PIM-DM, IGMPv3, OSPF for IPv6, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), RIPng, MLDv2, MLD, VRRPv3 |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI |
Encryption Algorithm | MD5, TLS 1.0, SSL 3.0, SSL 2.0, PEAP, TTLS |
Authentication Method | Secure Shell (SSH), RADIUS, X.509 certificates, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP) |
Features | VLAN support, Syslog support, DoS attack prevention, DiffServ support, IPv6 support, Digital Diagnostics Monitoring Interface (DDMI), DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), STP Root Guard, IPv4 support, DHCP relay, NTP server, DNS relay, DHCP client, Network Access Control (NAC), loop prevention, policy based access control, 4MB packet buffer, policy based rate limiting, Ethernet Protection Switched Ring (EPSRing), Bridge protocol data unit (BPDU), black hole routing, Control Plane Prioritisation (CPP), SuperLoop Protection (SLP), Long-Distance stacking (LD-VCStack), Secure Copy (SCP), Allied Telesis Management Framework (AMF), Built-In Self Test (BIST), Cable fault locator (TDR) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX |
RAM | 2 GB DDR SDRAM |
Flash Memory | 256 MB |
Status Indicators | Status |
Expansion / Connectivity | Expansion / Connectivity |
Interfaces | 48 x 1000Base-T RJ-45 ¦ 4 x SFP+ ¦ 1 x console RJ-45 ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x USB |
Expansion Slots | 1 (total) / 1 (free) x Expansion Slot |
Power | Power |
Power Device | Internal power supply |
Installed Qty | 2 (installed) / 2 (max) |
Power Redundancy | Yes |
Power Redundancy Scheme | 1+1 |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Consumption Operational | 95 Watt |
Miscellaneous | Miscellaneous |
Compliant Standards | FCC Class A certified, UL, cUL, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, UL 60950-1, EN 60950-1, EN 60825-1, CAN/CSA C22.2 No. 60950-1-03, VCCI Class A, China RoHS |
Dimensions & Weight | Dimensions & Weight |
Width | 44 cm |
Depth | 42 cm |
Height | 4.4 cm |
Weight | 5.2 kg |
Environmental Parameters | Environmental Parameters |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 50 °C |
Humidity Range Operating | 5 - 90% (non-condensing) |
Min Storage Temperature | -20 °C |
Max Storage Temperature | 70 °C |
Humidity Range Storage | 5 - 95% (non-condensing) |