APC Easy Switched PDU EPDU1016S - Power distribution unit (rack-mountable) - AC 200/208/230 V - 3680 VA - Ethernet - input: IEC 60320 C20 - output connectors: 8 (8 x IEC 60320 C13) - 1U - 2.5 m cord - black | EPDU1016S

Product Features

• Remote individual outlet control
  Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
• Remote management capabilities
  Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
• Network port sharing
  Allows four rack PDUs to be connected using In and Out ports so that only one network connection is necessary.
• Network management capabilities
  Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
• Power delays
  Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependent on that unit will function properly.
• Flash upgradeable
  Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released.
• Local current monitoring display
  The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.
• Rack-mountable
  Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.
• Single input power source
  Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Special Fetures

• Remote individual outlet control
• Remote management capabilities
• Network port sharing
• Network management capabilities
• Power delays
• Flash upgradeable
• Local current monitoring display
• Rack-mountable
• Single input power source

Product Specification