Cisco Catalyst IW9167E Heavy Duty / Radio access point / 10GbE, 5GbE, 2.5GbE / Bluetooth, Wi-Fi 6E / 2.4 GHz, 5 GHz, 6 GHz | IW9167EH-E-HZ

Product Features
- Multigigabit Ethernet
Dual Multigigabit Ethernet supports speeds up to 5 Gbps. All speeds are supported on Category 5e cabling, as well as 10GBASE-T (IEEE 802.3bz) cabling. - Smart AP
Smart AP causes the access point to change its power consumption to reflect its current client load. An access point will typically operate on the radios provided to it regardless of how many clients are connected. With Smart AP, if the number of clients is small enough, the access point will automatically reduce the radio stream count, saving power. - Band steering
Enhanced to help clients that are 6 GHz capable to leave the 5 GHz radio and connect to the 6 GHz one. Wi-Fi 6E clients are automatically directed to connect to the 6 GHz radio to take advantage of the benefits that the radio offers and free up the 2.4- and 5 GHz radios for legacy clients. IW9167 is Wi-Fi 6E ready, subject to approvals and regulations for the use of the 6 GHz spectrum by each countries' regulatory agencies - Uplink/downlink OFDMA
Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency. - Uplink/downlink MU-MIMO technology
Supporting four spatial streams, Multiuser Multiple Input, Multiple Output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput. - BSS coloring
Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions. - Target Wake Time
Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to three to four times the savings achieved by 802.11n and 802.11ac. - Intelligent Capture
Intelligent Capture probes the network and provides Cisco DNA Center with deep analysis. The software can track more than 240 anomalies and instantaneously review all packets on demand, emulating the onsite network administrator. Intelligent Capture allows for more informed decisions on your wireless networks. - Bluetooth 5
The integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, wayfinding, and analytics. - Scanning radio
Dedicated radio for monitoring air space to perform advanced RF spectrum analysis and deliver features such as Cisco CleanAir, Wireless Intrusion Prevention System (wIPS), and Dynamic Frequency Selection (DFS). - GNSS
A built-in GNSS (Global Navigation Satellite System) receiver provides coordinates to track the location of the access point. - M12 adapter
M12 adapter accessories give the flexibility to convert Ethernet and power interfaces on the base unit into M12 interfaces while retaining all the certifications. - Multipath operations
Multipath operations (MPO) can enhance reliability by sending duplicate copies of packets across multiple wireless paths. - Workgroup bridge (WGB)
Provides wireless connectivity to a lightweight access point infrastructure on behalf of wired clients that are connected via Ethernet behind the WGB access point.
Special Features
- Connect, automate, and operate anywhere with reliable wireless connectivity for mission-critical and time-sensitive applications
- Bring reliable wireless connectivity anywhere with heavy-duty design - IP67 rated, hardened to withstand shock, vibration, and extreme temperatures, certified for rail, designed for mining
- Peace of mind with built-in security you can trust from Cisco with trustworthy technology
- Future-proof your investment with Wi-Fi 6E support in a future software upgrade when regulatory authorities define and approve usage of the 6 GHz spectrum
Product Specification
Device Type | Radio access point |
Ruggedized Design | Outdoor |
Built-in Devices | GNSS receiver |
Width | 28.7 cm |
Depth | 26.7 cm |
Height | 7.1 cm |
Weight | 4.2 kg |
Processor / Memory / Storage | Processor / Memory / Storage |
RAM | 2 GB |
Flash Memory | 1 GB |
Networking | Networking |
Form Factor | External |
Connectivity Technology | Wireless |
Data Transfer Rate | 7.8 Gbps |
Line Coding Format | OFDMA |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, 10 Gigabit Ethernet, IEEE 802.11n, IEEE 802.11ac, 5 Gigabit Ethernet, 2.5 Gigabit Ethernet, Bluetooth 5.0 LE, IEEE 802.11ax (Wi-Fi 6E) |
Spread Spectrum Method | OFDMA |
Frequency Band | 2.4 GHz, 5 GHz, 6 GHz |
Status Indicators | System |
Features | Wi-Fi Multimedia (WMM) support, CleanAir technology, reset button, Maximum Ratio Combining (MRC), Wireless Intrusion Prevention System (WIPS), cyclic shift diversity (CSD), beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, workgroup bridge, Dynamic Frequency Selection (DFS), secure boot, 4x4:4 MU-MIMO technology, image signing, Cisco Trust Anchor module, BSS Coloring, Target Wake Time (TWT), intelligent capture |
Encryption Algorithm | AES, PEAP, TKIP, WPA, WPA2, EAP-SIM, WPA3, EAP-FAST, EAP-TLS, EAP-TTLS, MSCHAPv2, EAP-GTC, PEAPv1 |
Authentication Method | Extensible Authentication Protocol (EAP), EAP-TLS, EAP-TTLS, MS-CHAP v.2, PEAPv0, EAP-FAST, PEAPv1, EAP-SIM |
Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.11d, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11n, IEEE 802.11k, IEEE 802.3at, IEEE 802.11ac, IEEE 802.11r, IEEE 802.11u, IEEE 802.11v, IEEE 802.3bt, IEEE 802.11ax, Wi-Fi CERTIFIED 6, Wi-Fi CERTIFIED 6E |
Aerial | Aerial |
Antenna | External detachable |
Internet of Things (IoT) | Internet of Things (IoT) |
Internet of Things (IoT) Compatible | Yes |
Communications Technology | Bluetooth Low Energy (LE) |
Expansion / Connectivity | Expansion / Connectivity |
Interfaces | 1 x 100M/1G/2.5/5 Gigabit Ethernet (UPOE) - RJ-45 1 x 100M/1G/10 Gigabit Ethernet - SFP 1 x management - RJ-45 8 x aerial - RF |
Miscellaneous | Miscellaneous |
Compliant Standards | IEC 61000-4-11, EN 61000-6-1, FCC Part 15.247, RSS-102, ICES-003 Class A, EN 61000-6-2, EN 61000-6-4, IEC 60068-2-30, WEEE, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, ARIB STD-T71, EN 61000-4-29, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, EN 62311, EN 50121-4, VCCI Class A, IEC 61000-4-9, EN 50121-3-2, EMI/EMS Class B, EN 301 489-17 V2.1.1, FCC OET Bulletin 65c, EN 61373, FCC CFR47 Part 15 A, CNS 13438 Class A, EN 300 386, EN 50155, IEC/EN 61000-4-3, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, AS/NZS CISPR 32 Class A, EN 62368-1, IEC 62368-1, IEC/EN 61000-4-2, EN 55032 Class A, CISPR 32 Class A, EN 301 489-19, EN 55035, EN 301 489-1 V2.1.1, CISPR 35, IEC/EN 60529 IP66, EMI Class B, IEC 61000-4-18, EN 301 893 V2.1.1, EN 300 328 V2.2.2, IEC/EN 60529 IP67, KS C 9832, KS X 3124:2020, KS X 3126:2020, ARIB STD-66, KS C 9835:2019, UL 50E Type 4X, IEC 60068-3-3, EN 45545-3, DIN 5510-2, IP66, IP67, Class 1 Div 2 (C1D2), UL 121201, CSA C22.2 No. 213, ANSI/UL 60079-0:2013 (Group IIB), IECEx, ATEX Directive, UKEx, IEC/EN 60079-0, IEC/EN 60079-7, IEC/EN 60079-11, IEC/EN 60079-31, ANSI/UL 60079-0, ANSI/UL 60079-7, ANSI/UL 60079-11, ANSI/UL 60079-31, HAZLOC |
Power | Power |
Power Over Ethernet (PoE) Supported | UPOE |
Manufacturer Warranty | Manufacturer Warranty |
Service & Support | Limited warranty - advance hardware replacement - 1 year - response time: 10 days |
Environmental Parameters | Environmental Parameters |
Min Operating Temperature | -40 °C |
Max Operating Temperature | 70 °C |
Humidity Range Operating | 0 - 100% (condensing) |
Δεν βρέθηκαν δημοσιεύσεις