DIGITUS - Adapter cable - HDMI male to USB, DisplayPort - 20 cm - double shielded - black - 2K support, 4K30Hz (3840 x 2160) support, 1920 x 1080 at 120 Hz support, 3D video support | AK-330101-002-S

Product Features

· Supports: Resolutions up to 4K@30Hz.
· Supports: Resolutions up to 2K@30Hz.
· Supports: Resolutions up to 1920 x 1080 @ 120 Hz.
· Supports: 7.1 channel surround audio.
· Supported color depth: 48 Bit Deep Color
· Supports: 3D video timings
· Supports: eDP operation
· Supports: Video Convert - RGB / YCC (4:4:4) => 16-bit color
· Supports: Color conversion - YUV to RGB and from RGB to YUV
· Compatible with HDMI 1.4 and DisplayPort 1.2
· Compatible with HDCP 1.4 and DPCP
· Connection 1: HDMI Type A (plug)
· Connection 2: DisplayPort (plug)
· Connection 3: USB A (power supply)(plug)
· Length: 0.2 m
· Color: Black
· AOC - Active Optic Cable: No
· Tensile strength: 4 kg/min
· AWG: 30
· Bending radius: 60
· Cable color: black
· Shielding: double shielding
· USB-C product: no
· Total weight: 45 g
· Manufacturers notice:
· If you connect a USB-C monitor/TV/projector to a PC equipped with USB Type-C, make sure that your USB-C display supports DisplayPort signal output.
· The video output capabilities depend on your notebooks graphic card and the connected monitor. Some screens also limit the available resolution.
· In order to use a dual 4K output, the USB 4 device must support the PD3.0 protocol

Special Fetures

· Converts HDMI signals to DisplayPort signals
· HDMI input => DisplayPort output with USB A connection for power supply
· Plug-and-Play installation
· Enables an ultimate 4K experience with Ultra-HD resolutions of up to 3840 x 2160 and high speed with a refresh rate of 30 Hertz
· No driver and no power adapter required
· The locking mechanism of the DisplayPort plug prevents it from slipping out of the graphics port no interrupted connections while using the PC
· Nickel-plated contacts support secure signal transmission with low contact resistance, the triple braiding allows for seamless shielding

Product Specification

Cable Type	Adapter cable 2K support, 4K30Hz (3840 x 2160) support, 1920 x 1080 at 120 Hz support, 3D video support
Technology	Double shielded
American Wire Gauge (AWG)	30
Length	20 cm
Features	48 bit deep colour, bending radius 60 mm, 7.1 channel Surround Sound
Colour	Black
Connectivity
Connectors	19 pin HDMI Type A - male
Connectors (Second End)	20 pin DisplayPort - female ¦ 4 pin USB Type A (power only) - male
Miscellaneous
Compliant Standards	Plug and Play, DisplayPort 1.2, HDCP 1.4, DPCP 1.0
Dimensions & Weight
Weight	45 g