HPE Midline / Hard drive / 4 TB / hot-swap / 3.5" LFF / SATA 6Gb/s / 7200 rpm / with HP SmartDrive carrier | 861678-B21
Συνδεθείτε για να μπορέσουμε να σας ειδοποιήσουμε σχετικά με μια απάντηση
Product Features
- Smart carriers
HPE Hard Drives with smart carriers are designed to provide an interface to communicate critical status and management information. System status LED icons and a spinning activity ring reflecting the data-writing process notify users of the current system status. A blue LED located behind the handle can be activated remotely to guide users to a specific drive tray, while a do-not-remove icon positioned on the tray's eject button lights up to warn users when the removal of the drive would cause data loss. - Helium drives
Although hard drives are sealed, they have air inside. Air can create turbulence-induced risk vibrations which can limit the storage density of HDDs. Newer helium-filled drives virtually eliminate turbulence because helium is 1/7th as dense as air. This lower density allows the read/write mechanism to spin more easily and precisely, with less drag. Less internal turbulence means the drive platters can be closer together, allowing more platters and increasing the capacity potential in the same space. Less turbulence also means helium drives tend to use less power, and run cooler and quieter.
Special Features
- Smart carriers
- Helium drives
Product Specification
| Device Type | Hard drive - hot-swap |
| Capacity | 4 TB |
| Form Factor | 3.5" LFF |
| Interface | SATA 6Gb/s |
| Bytes per Sector | 512 |
| Features | Native Command Queuing (NCQ) |
| Width | 105.8 mm |
| Depth | 170 mm |
| Height | 26.8 mm |
| Bundled with | HP SmartDrive carrier |
| Performance | Performance |
| Drive Transfer Rate | 600 MBps (external) |
| Seek Time | 7.6 ms (average) / 15 ms (max) |
| Track-to-Track Seek Time | 0.25 ms |
| Spindle Speed | 7200 rpm |
| Expansion & Connectivity | Expansion & Connectivity |
| Interfaces | 1 x SATA 6 Gb/s - 7 pin Serial ATA |
| Compatible Bay | 3.5" LFF |
| Manufacturer Warranty | Manufacturer Warranty |
| Service & Support | Limited warranty - 1 year |
| Environmental Parameters | Environmental Parameters |
| Min Operating Temperature | 10 °C |
| Max Operating Temperature | 35 °C |
| Compatibility Information | Compatibility Information |
| Designed For | HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (3.5"), Medium Solution with HPE ProLiant DL360 Gen10 (3.5"), Small Solution with HPE ProLiant DL360 Gen10 (3.5") HPE ProLiant DL180 Gen9 (3.5"), DL180 Gen9 Base (3.5"), DL180 Gen9 Entry (3.5"), DL180 Gen9 Storage (3.5"), DL360 Gen10 (3.5"), DL360 Gen10 Base (3.5"), DL360 Gen10 Compute Server for Cohesity DataPlatform (3.5"), DL360 Gen10 Entry (3.5"), DL360 Gen10 High Performance (3.5"), DL360 Gen10 Low (3.5"), DL360 Gen10 Network Choice (3.5"), DL360 Gen10 Performance (3.5"), DL360 Gen10 Performance for Cohesity DataPlatform (3.5"), DL360 Gen10 SMB (3.5"), DL360 Gen10 SMB Network Choice (3.5"), DL360 Gen10 Solution (3.5"), DL380 Gen10 (3.5"), DL380 Gen10 All Flash Server for Datera (3.5"), DL380 Gen10 Base (3.5"), DL380 Gen10 Entry (3.5"), DL380 Gen10 Entry SMB (3.5"), DL380 Gen10 for Cohesity DataPlatform (3.5"), DL380 Gen10 for SAP HANA Compute Block (3.5"), DL380 Gen10 High Performance (3.5"), DL380 Gen10 Hybrid Server for Datera (3.5"), DL380 Gen10 Network Choice (3.5"), DL380 Gen10 Network Choice for CTERA (3.5"), DL380 Gen10 Network Choice for SAP HANA Compute Block (3.5"), DL380 Gen10 Performance (3.5"), DL380 Gen10 Server for CTERA (3.5"), DL380 Gen10 SMB (3.5"), DL380 Gen10 SMB Networking Choice (3.5"), DL380 Gen10 Solution (3.5"), DL388 Gen10 (3.5"), DL388 Gen9 (3.5"), DL388 Gen9 Base (3.5"), DL80 Gen9 Entry (3.5"), ML110 Gen9 (3.5"), ML110 Gen9 Base (3.5"), ML110 Gen9 Entry (3.5") |
Χαρακτηριστικά
Product Code
09:861678-B21
EAN Code
0190017063553
Manufacturer
Hewlett Packard
Δεν βρέθηκαν δημοσιεύσεις
