LANCOM XS-5110F - Switch - L3 - Managed - 8 x 1 Gigabit / 10 Gigabit SFP+ + 2 x 1/2.5/5/10GBase-T - rack-mountable | 61858
Product Features
- Flexible network topologies
The LANCOM XS-5110F is an ideal aggregation instance for the networking of access switches. Depending on the size of the installation, it integrates into the network topology either at the top level facing the WAN (2-tier design) or at the second level between a core switch and the access switches (3-tier design). - Maximum performance on all ports
With its fiber-optics and multi-Gigabit Ethernet (mGbE) ports, the LANCOM XS-5110F offers future-proof port performance for networks that meet the increasing demands occurring from increasingly powerful clients, a growing number of IoT devices, and cloud applications. Equipped with 8 SFP+ ports (10G) and 2 further backward-compatible 10G mGbE ports, this powerful networking device is used to connect access switches and is ideal for smaller distributed networks. - Configurable access control
The LANCOM XS-5110F stops rogue clients from gaining unauthorized access to the network. This is ensured by secured access control on all ports as per IEEE 802.1X (port-based, single, multi, and MAC-based) or by ACLs (access control lists). - Static routing and DHCP server
The LANCOM XS-5110F can handle layer-3 tasks to offer, for example, a DHCP server for IP-address management or to define fixed network routes across one or more network segments. This takes load off of the router or firewall and increases the overall speed of data exchange. Capacities are freed up to handle the external data traffic and improve the overall network efficiency.
Special Fetures
- Multi-gigabit aggregation switch with eight SFP+ ports (10G) and two multi-gigabit Ethernet (10/5/2.5/1G)
- Layer-3 features such as static routing and DHCP server
- Security with configurable access control on all ports as per IEEE 802.1X and access control lists
- Secure remote management through TACACS+, SSH, SSL, and SNMPv3
- SD-LAN for quick and easy configuration via the LANCOM Management Cloud
- Stacking support via downlink ports
Product Specification
Device Type | Switch - 10 ports - L3 - Managed - stackable |
Enclosure Type | Rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 8 x 1 Gigabit / 10 Gigabit SFP+ + 2 x 1/2.5/5/10GBase-T |
Performance | Latency: 4 µs ¦ Backplane speed: 200 Gbps ¦ Packet throughput: 148 Mpps |
Capacity | Tagged VLANs: 4096 ¦ Active VLANs: 4000 ¦ IGMP multicast groups: 1024 |
MAC Address Table Size | 32K entries |
Jumbo Frame Support | 12000 bytes |
Routing Protocol | IGMPv2, IGMP, IGMPv3, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), MLDv2, MLD |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI, SCP, ICMP, DHCP |
Encryption Algorithm | MD5, SSL |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
Features | Flow control, IGMP snooping, port mirroring, store and forward, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, firmware upgradable, SNTP support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, MLD snooping, Dynamic ARP Inspection (DAI), Cable Diagnostics Function, Uni-Directional Link Detection (UDLD), IPv4 support, LACP support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Port Security, SNMP trap, DHCP client, Management Information Base (MIB), dual firmware images, port isolation, Forward Error Correction (FEC), tagged VLAN, sFlow v5, Generic VLAN Registration Protocol (GVRP), IGMP proxy, cloud managed, metal housing, Precision Time Protocol (PTP), DiffServ Code Point (DSCP) support, 2 fans, IP source guard, Internet Control Message Protocol (ICMP), Management Information Base (MIB) II, IF MIB, IGMP querier, Voice VLAN, Private VLAN Edge (PVE), LLDP-MED, Guest VLAN, Denial of Service (DoS) protection, ARP spoofing, SD-LAN support |
Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v, IEEE 802.1as, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.1Qbb, IEEE 1588v2, IEEE 802.1Qat, IEEE 802.3bj, IEEE 802.1Qav |
Status Indicators | System, link/activity, fan, stack |
Expansion / Connectivity | |
Interfaces | 8 x 1/10Gbit LAN SFP+ ¦ 2 x 1/2.5/5/10GBase-T RJ-45 ¦ 1 x management (micro-USB) ¦ 1 x management (RS-232) RJ-45 ¦ 1 x USB Type A |
Power | |
Power Device | Internal power supply |
Voltage Required | AC 120/230 V (50/60 Hz) |
Power Consumption Operational | 34 Watt |
Power Consumption Stand by | 20 Watt |
Miscellaneous | |
Cables Included | 1 x serial cable - 1.5 m ¦ 1 x micro-USB cable - 1.5 m |
Rack Mounting Kit | Included |
Compliant Standards | EN55024, FCC CFR47 Part 15 A, EN 62368-1, EN 55032 |
Dimensions & Weight | |
Width | 44.2 cm |
Depth | 30 cm |
Height | 4.4 cm |
Weight | 4.9 kg |
Manufacturer Warranty | |
Service & Support | Limited warranty - 5 years |
Environmental Parameters | |
Min Operating Temperature | 0 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 10 - 90% (non-condensing) |
Features - Lancom Systems - 61858
No posts found