PLANET IGS-10020HPT - Switch - L2+ - Managed - 8 x 10/100/1000 (PoE+) + 2 x Gigabit SFP - DIN rail mountable, wall-mountable - PoE+ (270 W) - DC power | IGS-10020HPT
Product Features
- Environmentally hardened design
PLANET Industrial 8-Port Gigabit 802.3at PoE+ Switch, IGS-10020HPT, is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space. - Redundant ring, fast recovery for surveillance system
The IGS-10020HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol (802.1w RSTP), and redundant power supply system into customer's industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020HPT also protects customer's industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation. - High Power PoE for security and public service applications
To fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-10020HPT provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 270-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 270-watt PoE budget on the whole system, the IGS-10020HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, multi-channel (802.11a/b/g/n) wireless LAN access points and other PoE network devices by providing PoE power, doubling that of the current conventional 802.3af PoE.
Special Fetures
- Environmentally hardened design
- Redundant ring, fast recovery for surveillance system
- High Power PoE for security and public service applications
Product Specification
Device Type | Switch - 10 ports - L2+ - Managed |
Enclosure Type | DIN rail mountable, wall-mountable |
Subtype | Gigabit Ethernet |
Ports | 8 x 10/100/1000 (PoE+) + 2 x Gigabit SFP |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 270 W |
Performance | Switching fabric bandwidth: 20 Gbps ¦ Bandwidth: 16 Gbps ¦ Throughput (64-byte packet size): 14.8 Mpps |
Capacity | VLAN groups: 255 ¦ ACL entries: 123 ¦ Virtual interfaces (VLANs): 4094 ¦ Routing table entries: 32 |
MAC Address Table Size | 8K entries |
Jumbo Frame Support | 9KB |
Routing Protocol | IGMPv2, IGMP, IGMPv3, MLDv2, MLD |
Remote Management Protocol | SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI |
Encryption Algorithm | SSL |
Authentication Method | RADIUS, TACACS+ |
Features | Flow control, full duplex capability, routing, DHCP support, auto-negotiation, BOOTP support, VLAN support, IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, store and forward, IPv6 support, half duplex mode, full duplex mode, firmware upgradable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), reset button, Cable Diagnostics Function, bandwidth control, IPv4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), anti-spoofing protection, IP-MAC binding, Multicast VLAN Registration (MVR), Class of Service (CoS), tagged VLAN, TFTP client, 6KV ESD Protector, Type of Service (ToS), DiffServ Code Point (DSCP) support, Ethernet Ring Protection Switching (ERPS), Bridge protocol data unit (BPDU), Redundant Ring Technology, Link Aggregation, scheduler, Digital Diagnostics Monitoring (DDM), 6KV EFT protector, Network Timing Protocol (NTP) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.3at |
Status Indicators | Port transmission speed, power, fail, link/activity |
Expansion / Connectivity | |
Interfaces | 8 x 1000Base-T RJ-45 PoE+ - 36 W ¦ 2 x 1000Base-X SFP ¦ 1 x serial (console) RJ-45 |
Power | |
Power Device | Internal power supply |
Power Redundancy | Yes |
Voltage Required | DC 48 V |
Miscellaneous | |
Compliant Standards | IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, FCC Part 15 A, IP30 |
Dimensions & Weight | |
Width | 15.2 cm |
Depth | 10.7 cm |
Height | 7.2 cm |
Weight | 1.684 kg |
Environmental Parameters | |
Min Operating Temperature | -40 °C |
Max Operating Temperature | 75 °C |
Humidity Range Operating | 5 - 95% (non-condensing) |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 85 °C |
Δεν βρέθηκαν δημοσιεύσεις