PLANET IGS-12040MT - Switch - Managed - 8 x 10/100/1000 + 4 x Gigabit SFP - DIN rail mountable, wall-mountable - AC 24 V / DC 12 -72 V | IGS-12040MT
Product Features
- Environmentally hardened design
With IP30 aluminum industrial case protection, the IGS-12040MT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-12040MT can be placed in almost any difficult environment. - Redundant ring, fast recovery for critical network applications
The IGS-12040MT supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G. 8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer's industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as 20 ms. - Digital Input and Digital Output for external alarm
The IGS-12040MT supports Digital Input and Digital Output on its upper panel. The external alarm enables users to use Digital Input to detect external device's status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-12040MT port is link-down, link-up or power-dead. - IPv6/IPv4 full-functioned secure switch for building automation networking
The IGS-12040MT is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch, especially in the Industrial hardened environment. It supports both IPv4 and IPv6 protocols, advanced Layer 2 to Layer 4 data switching and redundancy, QoS traffic control, network access control and authentication, and Secure Management features to protect customer's industrial and building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures. - IPv4 and IPv6 VLAN routing for secure and flexible management
The IGS-12040MT offers IPv4/IPv6 VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secured, flexible management and simpler networking application. - User-friendly secure management
For efficient management, the IGS-12040MT is equipped with console, Web and SNMP management interfaces. With the built-in web-based management interface, the IGS-12040MT offers an easy-to-use, platform independent management and configuration facility. The IGS-12040MT supports SNMP and it can be managed via any management software based on standard of SNMP v1 and v2 protocol. For reducing product learning time, the IGS-12040MT offers Cisco-like command via Telnet or console port and customer doesn't need to learn new command from these switches. Moreover, the IGS-12040MT offers remote secure management by supporting SSH, SSL and SNMP v3 connection which can encrypt the packet content at each session. - Flexible and extendable solution
The 4 mini-GBIC slots built in the IGS-12040MT support dual-speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently. - Intelligent SFP diagnosis mechanism
The IGS-12040MT supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Special Fetures
- Environmentally hardened design
- Redundant ring, fast recovery for critical network applications
- Digital Input and Digital Output for external alarm
- IPv6/IPv4 full-functioned secure switch for building automation networking
- IPv4 and IPv6 VLAN routing for secure and flexible management
- User-friendly secure management
- Flexible and extendable solution
- Intelligent SFP diagnosis mechanism
Product Specification
Device Type | Switch - 12 ports - Managed |
Enclosure Type | DIN rail mountable, wall-mountable |
Subtype | Gigabit Ethernet |
Ports | 8 x 10/100/1000 + 4 x Gigabit SFP |
Performance | Switching fabric bandwidth: 24 Gbps ¦ Throughput: 17.85 Mpps |
Capacity | Virtual interfaces (VLANs): 4095 ¦ Routing table entries: 32 |
Jumbo Frame Support | 9KB |
Routing Protocol | IGMPv2, IGMP, IGMPv3, MLDv2, MLD |
Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI |
Encryption Algorithm | SSL |
Authentication Method | RADIUS, TACACS+ |
Features | Flow control, routing, DHCP support, auto-negotiation, BOOTP support, VLAN support, Syslog support, port mirroring, store and forward, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), IPv4 support, LLDP support, Link Aggregation Control Protocol (LACP), SNMP trap, Class of Service (CoS), Denial of Service (DoS), 6KV ESD Protector, DiffServ Code Point (DSCP) support, Ethernet Ring Protection Switching (ERPS), IP source guard, Internet Control Message Protocol (ICMP) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ad |
Status Indicators | Power, fail, alarm, link/activity |
Expansion / Connectivity | |
Interfaces | 8 x 1000Base-T RJ-45 ¦ 4 x 1000Base-X SFP ¦ 1 x serial (console) |
Power | |
Power Device | Internal power supply |
Power Redundancy | Yes |
Voltage Required | AC 24 V / DC 12 -72 V |
Power Consumption Operational | 12 Watt |
Miscellaneous | |
Compliant Standards | IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, IP30 |
Dimensions & Weight | |
Width | 10.7 cm |
Depth | 7.2 cm |
Height | 15.2 cm |
Weight | 1.01 kg |
Environmental Parameters | |
Min Operating Temperature | -40 °C |
Max Operating Temperature | 75 °C |
Humidity Range Operating | 5 - 95% (non-condensing) |
Min Storage Temperature | -40 °C |
Max Storage Temperature | 85 °C |
Humidity Range Storage | 5 - 95% (non-condensing) |
Δεν βρέθηκαν δημοσιεύσεις