MikroTik CRS518-16XS-2XQ-RM - Switch - L3 - 16 x 25 Gigabit SFP28 + 2 x 100 Gigabit QSFP28 - desktop, rack-mountable | CRS518-16XS-2XQ-RM
Please sign in so that we can notify you about a reply
Product Specification
| Device Type | Switch - 16 ports - L3 |
| Enclosure Type | Desktop, rack-mountable |
| Subtype | 25 Gigabit Ethernet |
| Ports | 16 x 25 Gigabit SFP28 + 2 x 100 Gigabit QSFP28 |
| Performance | Switching capacity: 1.2 Tbps ¦ Throughput: 600 Gbps ¦ Forwarding rate: up to 600 Mpps |
| Features | VLAN support, IGMP snooping, Jumbo Frames support, MLD snooping, LACP support, Multi-Chassis Link Aggregation (MLAG), voltage monitoring, PCB temperature monitor, ACL support, CPU temperature monitor |
| Compliant Standards | IEEE 802.1Q, IEEE 802.1ad |
| Processor | 1 QCA9531: 650 MHz |
| RAM | 64 MB DDR2 SDRAM |
| Flash Memory | 16 MB |
| Built-in Devices | 4 x fans |
| Expansion / Connectivity | |
| Interfaces | 1 x management (LAN) RJ-45 ¦ 16 x 1/10/25Gbit LAN SFP28 ¦ 2 x 40/100Gbit LAN QSFP28 ¦ 1 x console RJ-45 ¦ 1 x USB Type A |
| Power | |
| Power Device | Internal power supply |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 100-240 V (50/60 Hz) |
| Miscellaneous | |
| Included Accessories | Rack ears, K-54 fastening set |
| Rack Mounting Kit | Included |
| MTBF | 200,000 hours |
| Compliant Standards | RoHS, IP20, EAC |
| Software / System Requirements | |
| Software Included | MikroTik RouterOS (licence level 6) |
| Dimensions & Weight | |
| Width | 44.3 cm |
| Depth | 26.5 cm |
| Height | 4.45 cm |
| Environmental Parameters | |
| Min Operating Temperature | -40 °C |
| Max Operating Temperature | 70 °C |
Features - MikroTik - CRS518-16XS-2XQ-RM
General
16-Port
More Details
Product Code
07:229911
EAN Code
4752224007438
Manufacturer
MikroTik
No posts found
