MSI MEG Ai1300P PCIE5 - Power supply (internal) - ATX12V / EPS12V - 80 PLUS Platinum - AC 100-240 V - 1300 Watt - active PFC | 306-7ZP4A11-CE0
Product Features
- ATX 3.0 ready
It has an output port that is compliant with PCIe 5.0 and Intel PSDG (Power Supply Design Guide) ATX 3.0, also the power supply can hold up to 2x total power excursion and 3x GPU power excursion. - Level up your game
With native 16 Pin PCIe connector this power supply is ready for NVIDIA GeForce RTX 40 Series graphics cards. It can freely pipe up to 600W of power to PCIe 5.0 graphics cards. - Platinum certified
The efficiency of your power supply directly influences your system's performance and your power consumption. The 80 PLUS and Cybenetics PLATINUM certified promises lower energy consumption and higher efficiency. - Gaming intelligence
Gaming Intelligence is dedicated to providing many unique and useful features to improve the gamer's experience. - GPU support for all
The power supply can support the NVIDIA and AMD graphics cards. Prepared for the highest of requirements, the MEG power supply's IO supports can support different and versatile ways of connection according to the power connector design of different graphics cards. - Safety and stability
The power supply is here to provide your system a worry free operation under all loadings. - Easy to build
The power supply can be easily placed and installed into your build. - Fan design
Redefine the power supply's fan design and optimize its utility as the power supply's best operational support.
Special Fetures
- Supports NVIDIA GeForce RTX 40 Series graphics cards
- ATX 3.0 fully supported
- PCIe 5.0 ready, with native 16 pin connector
- Software sync with MSI center
- Full modular design
- Sleeve cables
- 80 PLUS Platinum certified for high efficiency
- 100% all Japanese 105°C capacitor
- Active PFC design
- Industrial level protection with OVP, OCP, OPP, OTP, SCP, UVP
- LLC Half Bridge Topology with DC-DC module design
Product Specification
Device Type | Power supply - active Power Factor Correction (PFC) - internal |
Specification Compliance | ATX12V / EPS12V |
PSU Form Factor | ATX |
Power Device | |
Input Voltage | AC 100-240 V |
Frequency Required | 50 - 60 Hz |
Power Output Connectors Details | 1 x power 24 pin ATX ¦ 1 x power 8 pin EPS12V with detachable 4 pin ATX12V section ¦ 1 x power 8 pin EPS12V ¦ 1 x 12+4 pin PCI Express 5.0 power 650 W ¦ 8 x 8 pin PCI Express power with detachable 2 pin section ¦ 16 x 15 pin Serial ATA power ¦ 4 x 4 PIN internal power |
Output Voltage | +3.3, +5, ±12 V |
Power Capacity | 1300 Watt |
Output Current | +3.3V - 25 A ¦ +5V - 25 A ¦ -12V - 0.3 A ¦ +5VSB - 3 A ¦ +12V1 - 40 A ¦ +12V2 - 50 A ¦ +12V3 - 50 A ¦ +12V4 - 50 A ¦ +12V5 - 50 A |
Efficiency | 92% |
Modular Cable Management | Yes |
80 PLUS Certification | 80 PLUS Platinum |
Miscellaneous | |
Included Accessories | Screws, cable combs |
Cables Included | USB-A to mini-USB Type B cable 60 cm ¦ Mini USB to 9-pin cable 60 cm ¦ ATX power cable 60 cm ¦ 16-pin 12VHPWR power cable 60 cm ¦ 16-pin 12VHPWR to 2x8 pin PCI Express power adapter 60 cm ¦ Power 8 pin +12V with detachable 4 pin section modular cable 60 cm ¦ 6 x 8 pin PCI Express power with detachable 2 pin section modular cable ¦ Power 8 pin EPS12V modular cable ¦ 4 x power 15 pin SATA cable ¦ 4 pin internal power cable ¦ AC input cable - external |
Cooling System | 120 mm fan |
Features | Overheat protection, over current protection, over voltage protection, overpower protection, undervoltage protection, short-circuit protection, heat sink, hydrodynamic bearing cooling fan, DC-DC technology, switchable single/multi 12V rails, fully modular, LLC Half Bridge Topology |
Compliant Standards | BSMI |
Manufacturer Warranty | |
Service & Support | Limited warranty - 10 years |
Dimensions & Weight | |
Width | 15 cm |
Depth | 16 cm |
Height | 8.6 cm |
Features - MSI - 306-7ZP4A11-CE0
No posts found