NETGEAR M4300-28G-PoE+ - Switch - L3 - Managed - 2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 24 x 10/100/1000 (PoE+) - front to back airflow - rack-mountable - PoE+ (720 W) | GSM4328PB-100NES
Product Features
- Outstanding stacking
M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables) High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption. - Higher flexibility
Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization. 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds. - Investment protection
Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks. Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection. - Secure services
With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs. - Industry standard management
Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN. Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support.
Special Fetures
- The M4300-28G-PoE+ provides 24 Gigabit PoE+ ports with 2 10GBASE-T and 2 10GBASE-X SFP+ uplinks all independent and 1G backward compatible
- At 110V, hot swap APS1000W power supplies deliver 630W redundant PoE+ budget across 24 ports, or 720W in share mode
- At 220V, hot swap APS1000W power supplies deliver 720W redundant PoE+ budget across 24 ports
- With 128Gbps non-blocking fabric, M4300-28G-PoE+ delivers L2/L3/L4 and IPv4/IPv6 rich services for wireless access layer, IP video and unified communications
- Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover for highest availability (HA)
Product Specification
Device Type | Switch - 28 ports - L3 - Managed - stackable |
Enclosure Type | Front to back airflow rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 24 x 10/100/1000 (PoE+) |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 720 W |
Performance | Switching capacity: 128 Gbps |
Max Units In A Stack | 8 |
Routing Protocol | OSPF, RIP, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, IGMPv3, MLDv2 |
Remote Management Protocol | SNMP, Telnet, HTTPS, SSH, CLI |
Authentication Method | RADIUS, TACACS+ |
Features | ARP support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), MLD snooping, STP Root Guard, IPv4 support, LACP support, DHCP relay, Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST), dynamic ARP protection, IP source guard, Bridge protocol data unit (BPDU), LISP Across Subnet Mode (ASM), Source-Specific Multicast (SSM) |
Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.3az |
Expansion / Connectivity | |
Interfaces | 2 x 10GBase-T RJ-45 ¦ 2 x 10GBase-X SFP+ ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 1 x serial (RS-232) RJ-45 ¦ 1 x console (mini-USB) ¦ 1 x USB Type A ¦ 24 x 1000Base-T RJ-45 PoE+ |
Power | |
Power Device | Internal power supply |
Installed Qty | 1 (installed) / 2 (max) |
Power Provided | 1000 Watt |
Voltage Required | AC 120/230 V |
Miscellaneous | |
Localisation | Europe, Americas |
Manufacturer Warranty | |
Service & Support | Limited warranty - lifetime |
Δεν βρέθηκαν δημοσιεύσεις