TRENDnet TI-PG62B / Switch / unmanaged / 4 x 10/100/1000 (PoE+) + 2 x Gigabit SFP / DIN rail mountable, wall-mountable / PoE+ (120 W) / DC power | TI-PG62B
Product Features
- PoE power
A 60 - 120 W PoE+ power budget supplies up to four Power over Ethernet devices. - Fault tolerance
Features dual redundant 12 - 56 VDC power inputs with output alarm relay. - Industrial hardened design
Equipped with a rugged IP30 rated housing designed to withstand a high degree of vibration, shock, protection against ESD/EMI/surge, and operate within a wide temperature range of -40 - 75° C.
Special Features
- 4 x Gigabit PoE+ ports and 2 x dedicated SFP slots
- IP30 rated metal enclosure with included DIN-rail and wall mount hardware
- 12 Gbps switching capacity
- Grounding point protects equipment from external electrical surges
- Dual redundant power inputs with overload current protection
- Alarm relay triggered by power failure of primary and/or redundant power
Product Specification
Device Type | Switch - 6 ports - unmanaged |
Enclosure Type | DIN rail mountable, wall-mountable |
Subtype | Gigabit Ethernet |
Ports | 4 x 10/100/1000 (PoE+) + 2 x Gigabit SFP |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 120 W |
Performance | Switching fabric bandwidth: 12 Gbps ¦ Forwarding performance (64-byte packet size): 8.9 Mpps |
MAC Address Table Size | 1K entries |
Jumbo Frame Support | 9KB |
Features | Auto-negotiation, store and forward, half duplex mode, full duplex mode, over-current protection, rugged, built-in DIP switch, 1MB packet buffer, 6 KV Electrostatic Discharge Protection, shock-resistant, vibration-proof |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.3at |
Status Indicators | Power |
Expansion / Connectivity | Expansion / Connectivity |
Interfaces | 4 x 1000Base-T RJ-45 PoE+ ¦ 2 x Gigabit LAN SFP |
Power | Power |
Power Device | External power adapter |
Power Redundancy | Yes |
Voltage Required | DC 12 - 56 V |
Miscellaneous | Miscellaneous |
Included Accessories | DIN-rail mounting kit, wall mounting kit, removable terminal block |
MTBF | 510,304 hours |
Compliant Standards | FCC, RoHS, WEEE, IP30, EN 60068-2-27, EN 60068-2-32, EN 60068-2-6 |
Dimensions & Weight | Dimensions & Weight |
Width | 14.3 cm |
Depth | 10.5 cm |
Height | 4.5 cm |
Weight | 700 g |
Manufacturer Warranty | Manufacturer Warranty |
Service & Support | Limited warranty - lifetime |
Environmental Parameters | Environmental Parameters |
Min Operating Temperature | -40 °C |
Max Operating Temperature | 75 °C |
Humidity Range Operating | 0 - 95% (non-condensing) |